Grinders

GrinderVoltage: 20VNo-load speed: 3000/6000/9000rpmDisc Size: 4.5''DrillNo-load Speed: 0-400 rpm / 0-1500 rpm / minMax Torque : 45NmChuck capacity : 0.8 - 10mmTorque settings : 15 + 1..

✅ Rated Voltage: 220-240V✅ Input Power: 1050W✅ No-load Speed: 11,000 r/min✅ Disc Diameter: 5"..

Drill:Power: 810WNo-Load Speed: 2800 RPMChuck Size: 13mmGrinder:Power: 850WNo-Load Speed: 11000 RPMDisc Size: 4.5"..

✅ Motor: Brushless ✅ Voltage: 20V ✅ Max Input Power: 900W ✅ No-load Speed: 3000/6000/9000 rpm ✅ Disc Diameter: 4.5" ✅ Spindle Thread: M14✅ Includes:1 Set of Abrasive Metal Cutting Discs (5 Pcs)1 Pcs 4.0Ah Battery Pack (TFBLI20021)1 Pcs Charger (TFCLI2001)..

Power: 1500WSize: 5"No Load Speed: 8500 RPM..

✅ Power: 150W✅ Number of Pieces: 21✅ No-load Speed: 3500 - 8000 RPM..

✅ Rated Power Input: 2200W✅ No-load Speed: 6600 RPM✅ Max. Wheel Diameter: 230mm (9")✅ Spindle Thread: M14✅ Net Weight: 5.0kg..

Voltage: 20VNo-load speed:3000/6000/9000 r/minDisc Size: 4.5''Battery and charger not included..

Powerful 750W Engine11000 Rolls / minVoltage 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Power : 300WNo-load speed: 10000-20000 minˉ¹No-load oscillations rate: 3,2°Attached 7Pcs..

Rated Power: 1050 WattNo Load speed: 600 - 2300 rpm/mSanding Paper Diameter: 215mm - 8.5"Dust Hose Diameter: 1.5"..

clamping Angle: 0-45° For 100-125mm Angle Grinder..

✅ Power: 560W✅ Operating Voltage: 220V✅ No-load Speed: 16,000 RPM✅ Planing Width: 82mm..

Power: 900W No Load Speed: 5000 - 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Voltage: 20VSpeed without loading: 3000/6000/9000rpmDisc Size: 4.5"..

✅ Rated Voltage: 220-240V ✅ Rated Input Power: 2400W✅ No Load Speed: 6000 r/min..

Voltage: 20VNo-load speed: 3000-8500 rpmDisc Size: 4.5''Battery and charger are included10 units of cutting disc..

Impact DrillVoltage: 20vNo-load Speed: 0-550 / 0-2000 rpm / minMax Torque : 60NmChuck capacity : 13mmTorque settings : 22+ 1Integrated work lightHammer SpecificationAngle GrinderVoltage: 20VNo-load speed: 3000/6000/9000 r/minDisc Size: 4.5''..

Voltage:220VNo-load speed: 180 - 480 / 250 - 650 rpmPower: 1800WSpeeds: 2 Speed..

Power: 2100WNo Load Speed: 8000-23000 rpm/mCollet Inner: 12mmInternal Ø of the bush: 6-8mmStroke of the router base : 60mm..

Rated power: 700 WRated speed: 11000 minAmperage at voltage: 230 VMax of cutting disc: 5 inches..

Power: 650WNo Load Speed: 11000 rpmCutting Disc Size: 100mm - 4.5 inches..

Voltage:220-240V~50/60HzInput power:1500W No-load speed: 9000rpmDisc diameter:125mmSpindle thread: M14Cutting depth:3-29 mmCutting width:8-30 mmAccessories1 x chisel1 x auxiliary handle1 x set carbon brushes4 x cutting disc..

Shank diameter : 6mm3pcs straight bit : 6mm, 12mm, 16mm1pcs 1/2″ 90 V- groove bit1pcs 1/2″ dovetail bit1pcs 32mm 45 chamber bit1pcs 1/2″ flush trim bits2pcs round over bit: 1/4″, 3/8″1pcs 1/4″ core box bit..

Shank diameter: 8mm3pcs Straight bit:6mm,12mm,16mm1pcs 1/2" 90°V-groove bit1pcs 1/2" Dovetail bit1pcs 32mm 45°Chamfer bit1pcs 1/2" flush trim bits2pcs Corner roundbit:1/4",3/8"1pcs 1/4" Core box bit1pcs 1/4" Core bit..

Size: 6mm..

✅ Voltage: 220-240V~50/60Hz✅ Input Power: 900W✅ No-load Speed: 12,000 RPM✅ Disc Diameter: 125mm✅ Spindle Thread: M14✅ Includes: 1 Auxiliary Handle (Disc Not Included)..

Size: 8"..

Power: 1010WNo Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable handCylinder protector..

Power: 1100WNo Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable handCylinder protector..

Power: 1100WNo Load Speed: 5000-12000 RPMVoltage: 220-240 V 50 HzSize: 5"Comfortable handCylinder protector..

Power: 710W No Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Power: 750W No Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Power: 900W No Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Voltage: 20VSpeed without loading: 3000/9000 rpmDisc Size: 4.5"..

Power : 300WNo-load speed: 10000-20000 minˉ¹No-load oscillations rate: 3,2°Attached 7Pcs..

Shank diameter : 12mm3pcs straight bit : 12mm, 16mm1pcs 1/2″ 90 V- groove bit1pcs 1/2″ dovetail bit1pcs 32mm 45 chamber bit1pcs 1/2″ flush trim bits2pcs round over bit: 1/4″, 3/8″1pcs 1/4″ core box bit..

1 pc BIM(M2) segmented saw blade, dia.: 87mm (3 7/16″).1 pc CRV radial flush-cut wood saw blade, size: 34mm (1 5/16″).1 pc Bi-metal standard flush-cut metal saw blade, size: 34mm (1 5/16″).1 pc Rigid scraper, size: 50mm (2″).1 pc Delta sanding pad, size: 80mm (3 1/8″).10 pcs Aluminium-oxide delta sa..

ACCESSORIES: 2 set eye shieldsInput power: 350WNo-load speed: 2950/minWheel diameter: 200mm1: Adjustable work rest lengthen wheel life 2: Adjustable eye shield for safety work3: Dust proof switch for long life4: Stable base for better stability..

Rated Power Input : 900WNo. Load Speed : 5000 - 11000 rpmCutting Disc Size : 5mmSpeeds: Adjustable Speeds..

Size: 8"..

Input power: 950WNo-load speed: 1100 rpmBlade Diameter: 100mmWith 15pcs Biscuit Dowel..

Voltage: 220-240VInput power: 1100WNo-load speed: 5000rpmDisc diameter: 150mm - 6"Spindle thread: M14Include:1set extra carbon brushes1 Pair Gloves..

Power: 600WSize: 4.5"..

Voltage: 220-240V / 50HzPower: 170W..

Power: 600WAmperage at voltage: 20-230 VNo-load speed: 12000-27000 minˉ¹Number of RPM stages: 6Spindle inner diameter: 10mmCollet diameter: 6mm..

Power: 2600 WRated speed: 6500rpmAmperage at voltage: 220-230 V  12 Acutting disc: 230 mm - 9 inches..

Power : 320WNo-load speed: 6000-2000 minˉ¹No-load oscillations rate: 3,2°Sanding plate diameter: 80 mm..