Ingco

Voltage: 220-240V~50HzInput Power:350WNo load speed：12000rpmDia of sanding pad: 125mm..

Power: 100WPreheat time: 3~5minutersStraight, flat head..

Voltage: 220VInput power: 90WPreheat.time:20 secondsTemp: 200-500Straight, tip head with Solder Wire FeederTemperature can be adjusted by rotating ..

✅ Input power: 60W ✅ Straight, tip head ✅ Preheat time: 1–2 minutes..

Power Supply: 12 Volt DCRated current: 10 AMaximum pressure: 140 PSIMaximum Airflow: 35 L/min..

Load capacity: 100pcs -Brad size: 15-50mm - Ga18, 1.251.00mm Operation pressure: - 0.5-0.7Mpa(75-100Psi)..

Voltage: 220Input power: 2000WNo load speed: 6500rpmDisc diameter:9"Including 1pcs auxiliary handle..

Voltage: 220Input power: 2200WNo load speed: 6600rpmDisc diameter:9"Including 1pcs auxiliary handle..

Viewing Area: 90×35mmCartridge Size: 110×90×10mmArc Sensor: 2Light State: DIN 4Dark State: Fixed shade 10Shade Control: UnadjustablePower On/Off: Fully AutomaticSensitivity Control:Unadjustable,AutoUV/IR Protection:DIN 16Power Supply: Solar cells. Re-chargeable battery. No battery change requiredSwi..

Size: 2-3-4-5-6-8mm..

Screwdriver Set + 7pcs..

Set: 6 PCsType: Magnetic ..

Standard Nozzle: 1.4mmPattern Width: 180-250mmPaint Capacity: 600ccOptional Nozzle: 1.3 - 2.3Operating Pressure: 2-3.5 barAir cons:4.2-7.1cfm(119-200l/min)..

Standard Nozzle: 1.5mmPattern Width: 180-250mmPaint Capacity: 400 ccOptional Nozzle: 1.5-2.0Operating Pressure: 3-4 barAir Cons: 4.2-7.1cfm (99-170l/Min)..

Reservoir Capacity: 0.75 LFlow Rate: 1 l/minSpray Tip: 215 MM..

Input power: 150WNo-load speed: 2950/minWheel diameter: 6"..

Voltage: 220-240V~50/60HzInput Power:2200WNo-load speed:4300rpmBlade diameter:235x20mmCutting capacity:  45 degree:65mm  90 degree:80mmAdjustable cutting depthAdjustable bevel cuttingWith 1pcs 235mm blade..

2000 CountsData HoldAC Current:2A/20A/200A/±(2.5% +8)AC Voltage:0.1~600V±(1.0% +5)DC Voltage:0.1~600V±(0.5% +5)Resistance:2kΩ/20kΩ±(1.0% +3)Packed by color box..

Power: 450WNo-Load Speed: 3400rpmChuck Size: 6.5mmReverse option..

Voltage:20 VLithium-Ion 2.0 Ah batteryLED battery power indicatorOne battery fits all Total 20 V multiple tools..

Voltage: 220-240 VoltFrequency: 50 HzInput power: 320 WattNo-load speed: 14000 RPMPolishing bottom size: 185 x 93 mmIt comes with 5 sanding papers..

Power: 100WVoltage: 220VAttachment: 2Pcs of Wax..

Weight: 600g..

Size: 30"..

Size: 36"Blade: 65mm..

Size: 6"..

Cold chisel 10''..

9″ Skeleton caulking gun Iron with teeth Thickness：0.8mm Length:235mm Diameter:51mm..

✅ Weight: 16oz / 450g ✅ Drop-forged hammerhead ✅ Fiberglass handle..

Length: 30M..

Size: 6"..

Size: 7"..

Pliers 8'' Hand Super One..

Size: 8 inches equivalent to 200 mmHigh quality carbon steel Isolated Hand to ease to grasp..

Size: 7"..

Hydraulic floor jack 2 Ton..

Size: 12"..

1pcs SL6.5*6*1251pcs PH2*6*125..

Number of accessories: 55..

Leather Hole Punch: 2.5/3/3.5/4/4.5/5mm..

Leather Hole Punch: 2.5/3/3.5/4/4.5/5mm..

Working Range: 0~15 mLevelling accuracy: ±1.5 mm at 5 mLine accuracy: ±1.5 mm at 5 mLevelling time: <4sSelf-levelling angle: ≤4°Laser Type: 650 nmLaser Class: ⅡOperating temperature: 0~+40℃Operating temperature: -20~+70℃Batteries: AA(1.5V) × 3..

Working Range: 0~30 m1 Horizontal Line4 Vertical LinesLevelling accuracy:±1.0mm at 5 mLine accuracy ±1.5mm at 5 mLevelling time<3sSelf-levelling range ≤3°Laser Type : RedLaser Class 3R,<5mW..

Weight: 500gMaterial: Steel with Fiberglass handle..

Weight: 1500gMaterial: Steel with Fiberglass handle..

Weight: 1000gMaterial: Steel with Fiberglass handle..

Weight: 300gMaterial: Steel with Fiberglass handle..

1PCS 4.5"" Combination pliers1PCS 4.5"" Diagonal cutting 1PCS 4.5"" End cutting pliers1PCS 4.5"" Long nose pliers1PCS 4.5"" Flat nose pliers1PCS 4.5"" Needle nose pliers..