Bosch

Torque (soft/hard/max) : 21/54/- NmNo-load speed : (1st gear / 2nd gear)      0 – 450 / 0 – 1700 rpmBattery type : Lithium-ionMax. impact rate : 0 bpmBattery voltage : 18 VTorque settings : 20+2Max. drilling diameter in wood : 35 mmMax. drilling diameter in steel : 10 mmMax..

Torque (soft/hard/max) : 21/54/- NmNo-load speed : (1st gear / 2nd gear)      0 – 450 / 0 – 1700 rpmBattery type : Lithium-ionMax. impact rate : 0 bpmBattery voltage : 18 VTorque settings : 20+2..

Motor power 1200 WMax. pressure 100 barMax. operating flow 300 l/hMax. flow temperature 40 °C..

1 magnetic universal holder1 practical manual screwdriver with ratchet function12 nut setters for use with hexagon-head screwsScrewdriver bit sets. 32 screwdriver bits, L = 25 mm1x Philips 0 /1 /2 /2 /3 mm1 x Pozidriv 0 /1 /2 /2 /3 mm1 x of Slotted 3 /4 /4.5 /5 /6 /7 /8 /9 mm1 x Hexagon 1.5 /2 /2.5 ..

Kit Contents: T218A T118G T118A T118B Jigsaw Blades..

Package components : PH1, PH2 (2x25 mm)PH3, PZ1, PZ2 (2x25 mm)PZ3, T10, T15, T20 (2x25 mm)T25, T27, T30, T40, T10, T15, T20, T25, T30, T40, PH2 (1x49 mm),PZ2 (1x49 mm)Bit holderPart No.: 2607017037..

Steel Drill bits with the following sizes:(2/3/3/3.3/4/4.2/5) mlWall  Drill bits with the following sizes:(4/5/6/7/8) mlWood Drill bits with the following sizes:(3/4/5/6/7/8) mlCup Heads (7/8/10)mlExtension (60ml)Different Kind of screwdriver heads (25ml)..

Universal Magnetic Holder24 Screwdriver Bits L = 25 mm - Phillips: 2 Pieces of PH12 Pieces of PH2, 2 Pieces of PH3, Pozidrive: 2 Pieces of PZ1, 2 Pieces of PZ2, 2 Pieces of PZ3, Slotted: 2 Pieces of 4 mm, 2 Pieces of 6 mm, 2 Pieces of 7 mm, Torx: 2 Pieces of T20, 2 Pieces of T25, 2 Pieces of..

Product Dimensions: 11.6 x 11.6 x 0.3 cm..

Work height: 107 – 165   cmTripod Thread: 5/8"  ..

Power: 790 WImpact Energy: 2.7JNo Load Speed: 920 rpmTool holder: SDSDrilling dia. concrete: 24mm..

Power : 830 WImpact energy :2,7 JImpact rate at rated speed : 0 - 4000 bpmRated speed : 0 - 900 rpmTool dimensions (width) : 83 mmTool dimensions (length) : 407 mmTool dimensions (height) : 210 mmDrilling range               ..

Power: 620WVolumetric flow rate: 3.5m³/minNo-load speed: 16,000rpmIdeal power-to-weight ratioOffers The highest cleaning efficiency among its classEasy to service carbon brush..

Power input 350 WNo-load speed 0 - 2500 rpmImpact rate at no-load speed 1 - 10 bpmDrilling rangeDrilling dia. in aluminium 13 mmDrilling dia. in wood 20 mmDrilling dia. in steel 10 mm..

power input : 1800 WWorking temperature : 60 - 350 - 550 °C Control, airflow 3-stage..

Technical datapower input : 1,600 WWeight without cable : 0.75 kg Length : 255 mm - Height : 255 mm Working temperature : 300 - 500 °C Airflow : 240 - 450 l/min Infinitely variable temperature control false Cold-air setting, 50°C falseControl, airflow 2-stage..

Power : 1400 WNo-load speed : 5500 rpmSaw blade bore diameter : 20 mmSaw blade diameter : 184 mmCutting depth   Max. cutting capacity in wood (90°) : 67 mmMax. cutting capacity in wood (45°) : 48 mm..

Laser diode : 650 nm, < 1 mWLaser class : 2Working range  up to 10 mWorking range with target plate : 10 mAccuracy : ± 0.5 mm/mSelf-levelling range : ± 4°Dust and splash protection : IP 5XPower supply : 2 x 1.5 V LR6 (AA)Tripod thread : 1/4"..

Laser diode: 635 nm, < 1 mWLaser class: 2Working range: 15 mLevelling accuracy: ± 0,5 mm/mSelf-levelling range: ±4°Power supply: 4 x 1.5V LR6 (AA)Tripod connection: 1/4"..

Laser diode : 635 nm, < 1 mWMeasurement range : 0,15 – 20,00Laser class : 2Measurement accuracy : typical ±3.0 mmMeasurement time, typical  :<0.5 sPower supply : 2 x 1.5 V LR03 (AAA)Automatic deactivation : 5 min.Units of measurement : m/cm, ft/inchBattery lifetime, individual measuremen..

Laser diode 635 nm, < 1 mWMeasurement range    0,05 – 50,00Laser class 2Measurement accuracy, typical +/- 1.5 mmMeasurement range of incline measurement    0 – 360° (4 x 90°)Measuring accuracy (typical)     +/- 0.2°Measurement time, typical ..

Max. detection depth 120 mmDetection depth, steel, max. 120 mmDetection depth, copper, max. 80 mmDetection depth of live cables, max. 50 mmDetection depth of wooden substructures, max. 38 mmAutomatic deactivation, approx. 5 minutesPower supply 1 x 9 V 6LR61..

No-load speed : 0 – 2800 rpmPower output : 600WTorque (soft screw driving applications) : 10,8 NmRated torque : 1,8 NmChuck capacity : 1,5 – 13 mmLength : 266,0 mmHeight : 180,0 mmImpact rate at no-load speed: 0 – 44.800 bpmDrilling rangeDrilling dia. in ..

Rated power input: 750 WNo-load speed: 0 – 3.000 rpmPower output: 351 WChuck capacity: 13 mmDrilling range:Drilling dia. in concrete: 16 mmDrilling dia. in wood: 30 mmDrilling dia. in steel: 12 mmDrilling dia. in masonry: 18 mm..

Power input 570 WNo-load speed 0 - 3000 rpmDrill spindle connecting thread 43Chuck capacity 1,5 - 13 mm Impact rate at no-load speed 0 - 41600 bpmDrilling range Drilling dia. in concrete 13 mmDrilling dia. in wood 25 mmDrilling dia. in steel 10 mmDrilling dia. in masonry 13 mmStandard accessories: A..

Rated input power: 220 WNo-load speed: 14000 rpmNo-load orbital stroke rate: 28000 – 28000 opmOscillating circuit diameter: 1.5 mmSanding plate width: 101 mmSanding plate length: 112 mmSanding sheet for clamping width: 114 mmSanding sheet for clamping length: 140 mm..

Rated input power: 450 WStroke rate at no load: 800 – 3,100 spmWeight: 1.9 kgSaw, stroke length: 18 mmCutting depthCutting depth in wood: 65 mmCutting depth in aluminium;10 mmCutting depth in non-alloyed steel:  3 mmTotal vibration values (Sawing wood)Vibration emission..

Power: 650WNo Load Speed: 500 – 3100Cutting depth in wood: 90mmCutting depth in aluminium: 20mmCutting depth in non-alloyed steel: 10mm..

Input power 2100 WNo-load speed 6500 rpmGrinding spindle thread M 14Main handle ShaftDisc diameter 230 mmWeight 5 kg..

Power input : 900 WNo-load speed : 11500 rpmGrinding spindle thread : M 14 Disc diameter : 125 m..

Power input : 710 WNo-load speed : 12000 rpmGrinding spindle threa : d M10Disc diameter : 100 mm..

GrinderPOWER INPUT : 710 WNO-LOAD SPEED : 12000 RPMGRINDING SPINDLE THREA : D M10DISC DIAMETER : 100 MMDrillPOWER INPUT 570 WNO-LOAD SPEED 0 - 3000 RPMDRILL SPINDLE CONNECTING THREAD 43CHUCK CAPACITY 1,5 - 13 MM IMPACT RATE AT NO-LOAD SPEED 0 - 41600 BPMDRILLING RANGE DRILLING DIA. IN CONCRETE 13 MM..

Angle Grinder GWS 750-100 Rated input power : 750 WNo-load speed : 11000 rpmDisc diameter : 100 mmRotary Hammer With SDS-PLUS GBH 2-24 DRERated input power : 790 WImpact energy : 2,7 JImpact rate at rated speed : 0 - 4200 bpmRated speed : 0 - 930 rpmDrilling rangeMax. drilling diameter m..