Carpentry Tools

Drill Specification:Power: 710WNo Load Speed: 3000 rpmChuck Size: 13mmHammer Function: YesReverse Function: yesGrinder Specification:Power: 750WNo Load Speed: 12000rpmCutting Disc Size: 4.5"..

Voltage : 4VNo-load Speed : 250r/minBattery : Li-ionBattery Capacity : 600mAhCharge Time : 3-5Hr..

Steel Drill bits with the following sizes:(2/3/3/3.3/4/4.2/5) mlWall  Drill bits with the following sizes:(4/5/6/7/8) mlWood Drill bits with the following sizes:(3/4/5/6/7/8) mlCup Heads (7/8/10)mlExtension (60ml)Different Kind of screwdriver heads (25ml)..

Voltage:12VNo-load speed:0-350/0-1350/minMax.torque:20NMChuck capacity:0.8-10mmTorque settings:15+1Mechanical 2-speed gearCharge volts:220V-240V~50/60HzIntegrated work lightWith 2pcs 1.5Ah battery packWith 1pcs chargerWith 1pcs Cr-V 65mm bits..

Voltage: 4 VoltHead Size: 1/4 inchesNo-load Speed: 0-220 RPMMaximum torque: 5.5 NMTorque Setting: 15+1It features LED lamp and charge level display..

115 Pcs Tools Set1 Pcs 680W Impact Drill220-240V~50/60Hz, 13mm key chuck1 Pcs 8Oz Claw Hammer1 Pcs 7” Combination Pliers1 Pcs 6"" Adjustable Wrench1 Pcs SL5.5x100 Screwdriver1 Pcs PH1x100 Screwdriver1 Pcs 3M Steel measuring tape4 Pcs Wood Drill bits 4,5,6,8mm5 Pcs Twist Drill bits 2,3,4,5,6mm5 Pcs M..

Voltage: 220-240 VoltFrequency: 50-60 HzInput power: 400 WattNo-load speed: 800 - 3000 RPMCutting capacity for wood: 55 mmCutting capacity for steel: 6 mmIt comes with 3 blades..

Voltage: 12v No-load Speed: 0-350 rpm / 0-1350 rpm / min Max Torque : 20Nm Chuck capacity : 0.8 - 10mm Torque settings : 15 + 1 Mechanical 2 speed gear Charge Volts: 220v-240v~50/60hz Integrated work light..

1 Pcs 12V Lithium-Ion 1.5Ah batteriesWith 1pcs battery packWith 1pcs 2Hr chargerCharge volts:220V-240V~50/60Hz1 Pcs Magnetic bits holder1 Pcs SL5.5x100 Screwdriver1 Pcs PH1x100 Screwdriver1 Pcs 7" Combination Pliers1 Pcs 8Oz Mini Claw Hammer1 Pcs Test Pencil（Test voltage：100-500VAC）1 Pcs 3M Ste..

Rated input power: 220 WNo-load speed: 14000 rpmNo-load orbital stroke rate: 28000 – 28000 opmOscillating circuit diameter: 1.5 mmSanding plate width: 101 mmSanding plate length: 112 mmSanding sheet for clamping width: 114 mmSanding sheet for clamping length: 140 mm..

Power: 710 WNo-load speed: 16000 minPlaning width: 82 mmPlaning depth: 0-2,5 mmGrooving depth: 0-15 mm..

Power: 710 W No-load speed: 0-14000r.p.m.Air volume: 4 m³/min..

800 Watts Speeds15000 RPM4.5m /minWith 1pcs dust bagWith 1pcs flexible tubeWith 2pcs suction nozzles..

Adjustable driving forceQuick jam releaseMade of all-steel construction200pcs Staples200pcs U-Shape Staples200pcs Brad Nails..

Size: 16"..

Drill Specification:Power: 710WNo Load Speed: 3000 rpmChuck Size: 13mmHammer Function: YesReverse Function: yesGrinder Specification:Power: 750WNo Load Speed: 12000rpmCutting Disc Size: 4.5"..

Power: 130 WattNo Load Speed: 10.000 - 32.000Collet Size: 3.2mm52 pieces for engraving and engraving on glass, metal, plastic, acrylic, grinding, grinding and boring works with flexible farmers..

Voltage: 220-240V~50/60HzInput power: 500WSpraying Pressure: 0.1-0.2BarMax flow: 850ml/minMax. viscosity: 50DIN-sPower cord length: 2.0m800ml container..

Rated Voltage : 220~240V/50~60HzRate Power : 160WNo-load Speed : 10000-36000r/minChuck Size: 2.5mm..

15pcs  6.35x25 MM CR-V  screwdriver bit:-SL3,SL4,SL5,SL6-PH0,PH1,PH2,PH3,PZ1,PZ2-T15,T20-H4,H5,H66PC 1/4" socket: 5,6,7,8,9,101PC 4-6mm(25mm)adaptor1PC T-handle Ratchet wrench1PC  5X100MM bit holder with strong magnetic..

Voltage: 12v No-load Speed: 600 rpm / min Max Torque : 20Nm Chuck capacity : 0.8 - 10mm Torque settings : 15 + 1 Charge Volts: 220v-240v~50/60hzIntegrated work light..

Voltage: 20V No-load Speed: 0-400 rpm / 0-1500 rpm / min Max Torque : 45Nm Chuck capacity : 0.8 - 10mm Torque settings : 15 + 1 With 1pcs battery packWith 1pcs chargerIntegrated work light..

Voltage:20VNo-load speed:0-400/0-1500/minMax.torque:45NMChuck capacity:0.8-10mmTorque settings:15+1Auto-lock keyless chuckMechanical 2-speed gearSpindle lock function20V Lithium-Ion 2.0Ah batteriesWith 2pcs battery packWith 1pc 1Hr fast chargerCharge Volts..

Power: 130 WattNo Load Speed: 10.000 - 32.000Collet Size: 3.2mm49 pieces for engraving and engraving on glass, metal, plastic, acrylic, grinding, grinding and boring works with flexible farmers..

1 pcs 12V lithium ion Cordless Drill1 pcs 680 W Impact Drill1 Pc SL5.5 X 100mm Screwdriver1 pc PH1*100mm Screwdriver1 pc 150mm Magnetic Shank35Pcs Screws ( 10pcs x ST3.5 , 15Pcs x ST4, 10Pcs x 5ST5 )35Pcs Plastic Plugs  ( 1Pcs x 5mm , 15Pcs x 6mm , 10Pcs x 8mm)1Pc 3m steel measuring tape7Pcs Po..

1 Pcs 10"" Pump Plier1 Pcs 7"" Combination Pliers1 Pcs 8Oz Claw Hammer1 Pcs SL5.5*100 Screwdriver1 Pcs PH1*100 Screwdriver1 Pcs Tset Pencil(test volte ：100-500V AC)1 Pcs 8"" Adjustable Wrench1 Pcs 3M Steel measuring tape1 Pcs Mini Hacksaw frame9 Pcs Hex key 1.5-2-2.5-3-4-5-6-8-10MM20Pcs screwdriver ..

5 pcs (SL3 X 75 / 4 X 100 / 5.5 X 125 / 6 X 150 / 8 X 200mm)1 pc (SL6 X 38mm)4 pcs (PH0 X 60 / PH1 X 75 / PH2 X 100 / PH3 X 150mm)..

Size:12"..

Range:0-200mm Reading:0.01mm IP54 housing Battery 3V Metric/inch system conversion at any position ..

Power input : 670 WNo-load speed : 12000 rpmGrinding spindle threa : d M10Disc diameter : 100 mm..

Power: 280WNo Load Speed: 350 - 1400 rpmChuck Size: 0.8 - 10mmDrill in Wood: 16 - 20mmDrill in Steel: 10mm..

Power: 600WNo Load Speed: 0-2800rpmChuck Size: 13mmDrilling Dia. In Wood: 20mmDrilling Dia. In Steel: 10mmDrilling Dia. In Concrete: 13mm..

Power: 810WNo Load Speed: 2800 rpmChuck Size: 13mmDrilling output in concrete : 16mmDrilling output in steel: 13mmDrilling output in wood: 30mm..

Power: 430 WNo-load speed  : 26000 minCollet diameter: 6 mmStroke of the router base: 30 mm..

Power: 650WNo Load Speed: 11000 rpmCutting Disc Size: 100mm - 4.5 inches..

Power: 1500 WNo-load speed: 5500 minMax. / min. of circular saw blade: 190 / 185 mmBore of circular saw blade: 20 mmMax. thickness of circular saw blade: 2 mmMax. cutting depth at 90° :  66 mmMax. cutting depth at 45°  : 46 mm..

Power: 710WNo load speed: 700-3000/minStroke length: 26mmMax. cutting capacity: 85mmCutting ability in Wood: 85mmCutting ability in Aluminum: 20mmCutting ability in Steel: 10mmOrbital Action: 4 Position..

Power 550 WNo Load Speed: 700 - 3000 rpmCutting ability in wood 65 mmCutting ability in aluminum 10 mmCutting ability in steel 3 mmAngularity of the body (left / right) 45°/45°..

Battery :  Li-ionNo load speed:  0-350/0-1300r/minRating battery voltage : 1.5 Ah（Li-ion)Charging current : 1.5ACharge time: 1HChuck capacity:  0.8-10mm(3/8”)Max torque for hard:    30 NmMax torque for soft::  22 NmWood:  28mmSteel:  10mmScrewdriver: ..

Power of the axle: 24 voltsCarrying battery: 2 capacityNo Load Speed: 0-350 / 0-1350Charging the battery: 70 minutesDiameter of screw: 10 mlTorque: 50/55 NewtonStress rate: 1.5: 13 mmDrilling in wood: 40 mlDrilling in steel: 13 m..

400 Watts14000 RPM3.0m /minAttach Bag..

Power: 750W No Load Speed: 12000 RPMVoltage: 220-240 V 50 HzAir ventComfortable rubber handCylinder protector..

Screwdriver Set + 7pcs..

Contain: 410 Pcs..

Voltage: 220-240V~50/60HzInput power: 220W (30W)Glue yield: 20-30g/minWarm-up time: 3-5minsThermal adhesive rod: Φ 11.2mmOn / Off Power SwitchIncluded accessories: 8pcs..

4 pcs (SL 6X38 / 5.5 X 75 / 6.5 X100 / 8 X 150mm)4 pcs (PH2 X 38 / PH1 X 75 / PH2 X 100 / PH3 X 150mm)10 pcs precision screwdrivers..

Set of 8 WrenchesSize: 0.6,0.8,1,1.2,1.4,1.5,1.7,1.9 cm..

Voltage: 220-240 VoltFrequency: 50-60 HzInput power: 650 WattNo-load speed: 800 - 2800 RPMCutting capacity for wood: 80 mmCutting capacity for steel: 8 mmIt comes with 5 blades..